耐磨陶瓷和陶瓷同属于陶瓷，采用多元复合原理，进行固化剂的复配。与主剂反应后提高固化物在耐温性和高温工况下的耐老化性、耐磨蚀性。多元树脂复配。采用环氧树脂、酚醛环氧树脂，有机硅树脂、DBT-7增韧剂按适当比例共混，达到大发挥各种树脂性能。
施工工艺性能得到了极大的改善，如BD181耐磨陶瓷粘贴胶可在不用磁铁及其他支撑措施的条件下在设备立面和顶棚进行施工，满足了不同环境工况下的施工要求的性能指标。耐温性、耐老化性等指标赶上并超过了部分进口耐磨陶瓷粘贴胶粘剂。如BD400高温胶大可耐450℃高温，BD1200高温胶适用于1200℃工况下粘固。（图/文www.yxwdcy.com）
中译英：
Wear resistant ceramic and ceramic belong to the ceramic, using multivariate composite principle, curing agent complex. And the main agent response after improving curing compounds in temperature and the working condition of high temperature resistance to aging, wear and corrosion resistance. Polyester resin compound. Using epoxy resin, phenolic epoxy resin, silicone resin, toughening agent blend DBT-7 in proper proportions, reached the maximum play a variety of resin properties.

Construction technology of performance has been greatly improved, such as BD181 wear-resistant ceramic adhesive in using a magnet and other supporting measures under conditions of equipment in the facade and roof construction, to meet the different environmental condition of construction performance requirements. Temperature resistance, aging and other indicators to catch up with and surpass of some imported wear resistant ceramic paste adhesive. As of BD400 high temperature adhesive is resistant to high temperature of 450 ℃maximum, BD1200 high temperature glue is applied to 1200 ℃condition cements.